Powerdrive F300

1.1 kW – 2.8 MW (1.5 – 4,200 hp)
200 V / 400 V / 575 V / 690 V

Powerdrive F300 AC variable speed drive is designed to control all AC induction motors and sensorless permanent magnet motors on the market. Even greater performance and energy efficiency savings can be achieved with our Dyneo® package which includes the Powerdrive F300 and the LSRPM permanent magnet motor.

Flexible functionality, minimizing your resources

  • Provides flexibility in cabinet mounting options and functionality including I/O and fieldbus communications
  • The F300 is a flexible solution for panel mounting, integration into systems and wall mounting in clean environments. Automation centres can provide built-to-order cabinet solutions, ideally matching customer requirements.
  • Comprehensive on-board drive programming available for fan, pump and compressor applications
  • On-board PLC provides extensive IEC 61131-3 compliant programming functionality without the additional cost
  • Optimum energy efficiency
  • Best in class efficiency from matched motor and drive combinations
  • Enables conformance with the latest EC efficiency regulations through the control of AC induction motors and Ultra Efficient IE4 PM/ Super Nema Premium Motors.

Ease and speed of design, build and commissioning

  • Smaller drive dimensions to allow for easier, more economical installation
  • Programming software enables rapid, clear code development and the drive interface and PC tools also allow fast, simple drive commissioning, diagnostics and maintenance
  • Equipped with wide motor control functionality flexible to ventilation, pumping and compression application needs, which can be rapidly accessed to exacting levels of flow control
  • Comprehensive I/O offering boosts component connectivity
  • Multiple fieldbus protocols are supported
  • Wide power range from 1.1kW through to 2.8MW  to suit your fan, pump and compressor rating
  • ​Fan and pump macros with PC Tools provide fast, simple access to flow performance
  • Two PID Controllers with anti-windup and user scaling provide flow-specific functionality
  • Logic functions including ‘and’ , ‘or’, ‘invert’, ‘binary sum’ and ‘timer’ achieved through easy menu setup
  • Real-time clock available on the KI-HOA Keypad RTC included in standard offer
  • Water hammer control with S-ramp deceleration
  • Catch a spinning motor
  • On-board Fire Mode allowing run to failure in the event of a fire for the extraction of smoke
  • Low load condition monitoring and hysteresis for broken belt and dry pump detection

Flexible I/O range

  • I/O specific to pumping, ventilation and compression application
    • 2 x analog input, 2 x analog output, 3 x digital input,
    • 3 x configurable digital output; 2 x form C relay output,
    • 1 x Safe Torque Off input

Safe Torque Off

  • Safe Torque Off functionality can remove the need for a contactor and can avoid a complete power-down for safe access to machinery

Harmonics and drive conformance

  • Low harmonic emissions and achieves high conformance levels.

Key data

  • 1.1 kW – 2.8 MW (1.5 – 4,200 hp)
  • Supply phases: 3 phase

Standard features

Intelligence:

  • Onboard PLC

Onboard comms:

  • RS485

Safety:

  • 1 x Safe Torque Off (STO) terminal
  • SIL3/PLe compliant

Keypad:

  • Hand-Off-Auto control keypad as standard

Option slots:

  • 3

Parameter cloning via:

  • PC tools
  • Smartcard
  • SD card

VOLTAGE RATINGS

100 V (100 V – 120 V ± 10%)
200 V (200 V – 240 V ± 10%)
400 V (380 V – 480 V ± 10%)
575 V (500 V – 575 V ± 10%)
690 V (500 V – 690 V ± 10%)
CONTROL MODE
Open loop vector or V/Hz induction motor control
Open loop Rotor Flux Control for induction motors (RFC-A)
Open loop permanent magnet motor control (RFC-S)
Closed loop Rotor Flux Control for induction motors (RFC-A)
Closed loop permanent magnet motor control (RFC-S)  ✓
Active Front End (AFE) power quality convertor  ✓

SINGLE DRIVES:

FRAME SIZE DIMENSIONS (H X W X D) WEIGHT KG(LB)
mm in kg lb
3 365 x 83 x 200 14.4 x 3.3 x 7.9 4.5 Max 9.9 Max
4
365 x 124 x 200
14.4 x 4.9 x 7.9 6.5 14.3
5 365 x 143 x 200 14.4 x 5.6 x 7.6 7.4 16.3
6 365 x 210 x 227 14.4 x 8.3 x 8.9 14 30.9
7 508 x 270 x 280 20 x 10.6 x 11.0 28 61.7
8 753 x 310 x 290 29.7 x 12.2 x 11.4 52 114.6
9A 1049 x 310 x 290 41.3 x 12.2 x 11.4 66.5 146.6
9E | 9T † 1010 x 310 x 290 41.3 x 12.2 x 11.4 46 101.4
10E | 10T † 1010 x 310 x 290 41.3 x 12.2 x 11.4 46 101.4
11E| 11T† 1190 x 310 x 312 46.9 x 12.2 x 12.3 63 139.8

MODULAR DRIVES:

FRAME SIZE DIMENSIONS (H X W X D)
mm in
INVERTER
9D 773 x 310 x 290 30.4 x 12.2 x 11.4
10D 773 x 310 x 290 30.4 x 12.2 x 11.4
11D 863 x 310 x 312 34 x 12.2 x 12.3
RECTIFIER
10A
6 pulse
355 x 310 x 290
6 pulse
15.8 x 12.2 x 11.4
11A | 11T
6 pulse
415x 310 x 290
12 pulse
415 x 310 x 290
6 pulse
16.3x 12.2 x 11.4
12 pulse
16.3 x 12.2 x 11.4

Dimensions include mounting brackets.

† Internal line choke not included